Welcome to our company websites!

News

  • How To Improve The Stability Of The Mould?

    How To Improve The Stability Of The Mould?

    In the production practice, once some moulds are put into the production line, they often have various problems, which can not meet the production requirements or technical requirements of the products, resulting in the abnormal shutdown of the production line, which brings many unstable factors....
    Read more
  • The 8 Process Performances Of Precision Moulds

    The 8 Process Performances Of Precision Moulds

    The precision mould processing process generally includes forging, cutting, heat treatment, etc., in order to ensure the quality of the mould processing and meet the process performance requirements of the mould. The requirements of precision mould processing materials: materials should have good...
    Read more
  • There Are 5 Problems Of 3D Printing That Need To Be Resolved

    There Are 5 Problems Of 3D Printing That Need To Be Resolved

    First, how to detect. To be an industry, there is no universal testing method that may not work; Second, the stability of performance also needs to be tested; Third, the dimensional accuracy needs to be improved; Fourth, the organizational structure needs to be studied; Fifth, efficiency issues. ...
    Read more
  • The “stages” of 3D Printing

    The “stages” of 3D Printing

    This technology can’t help its mass production of industrial products – modern cars or home appliances are born on the assembly line, and we can’t expect printers to replace the assembly line at present. 3D printing certainly has a stage to show its talents. The first is the rap...
    Read more
  • Unscramble 3D Printing: A Typical Digital Manufacturing Technique-1

    Unscramble 3D Printing: A Typical Digital Manufacturing Technique-1

    British scientists have printed the “Terminator Robotic Arm”; Japan’s annual budget application supports the technical development of 3D printed metal products; 3D printing allows French patients to regain their noses… The above is the information found by reporters on the...
    Read more
  • Mould Industry Conflicts And Obstacles In China

    Mould Industry Conflicts And Obstacles In China

    The Modern industrial requirements for moulded parts not only requires high precision but also has the inherent quality, in order to meet this demand, we must be development and utilization of new technology of mould. And currently, in the southern coastal areas are gradually promoting the use of...
    Read more
  • Analysis of the Uneven Color of Injection Molding

    Analysis of the Uneven Color of Injection Molding

    The main reasons for the uneven colour of injection moulding products and solutions are as follows: 1. Poor diffusion of colourants, this situation is often the gate near the pattern. 2. Plastic or colourant thermal stability is poor, to stabilize the colour of parts, must be strictly fixed produ...
    Read more
  • Analysis of the Cause of Shrinkage of Injection Moulding

    Analysis of the Cause of Shrinkage of Injection Moulding

    Injection moulding process, the product shrinkage is a more common phenomenon. The main reasons for this are: Machine side: 1. Nozzle hole is too large to cause the flow of reflow and shrinkage, too small resistance to excessive shrinkage. 2. Lack of clamping force caused by the flash will shrink...
    Read more
  • Cause Analysis of Warping Deformation of Injection Moulding

    Cause Analysis of Warping Deformation of Injection Moulding

    The deformation, bending and twisting of the injection moulded product is mainly due to the fact that the shrinkage of the flow direction in the plastic moulding is larger than that in the vertical direction, so that the shrinkage rate of the workpiece is different and warped, and the injection m...
    Read more
  • Analysis of the Causes of Weld Seam in Injection Molding

    Analysis of the Causes of Weld Seam in Injection Molding

    Fused plastic in the cavity due to encounter insert holes, the flow rate is not coherent area, filling material flow interrupted area and multi-stranded form of convergence, because it can not be completely fused to produce a linear weld. In addition, in the occurrence of gate injection mould wil...
    Read more
  • Analysis Of The Problems & Causes Of The Injection Molds

    Analysis Of The Problems & Causes Of The Injection Molds

    Analysis of the Cracking of Injection Molding Cracking, including the surface of the pieces of filamentous cracks, micro-cracking, top white, cracking and due to sticky mould, flow channel sticky mould caused by or traumatic crisis, according to the cracking time mined mold cracking and applicati...
    Read more
  • New Design 3D Printing Services & Technology For Injection Molds Was Introduced

    New Design 3D Printing Services & Technology For Injection Molds Was Introduced

    Recently, the advanced 3D printing materials and technology developers AvanteTechnology issued news that it introduced for injection moulds new “MoldNow” design and 3D printing services. All the moulds produced by the service will be made using Avante’s own composite material. T...
    Read more
123456 Next > >> Page 1 / 9
WhatsApp Online Chat !